Our HFR/AW Cambridge roll comes in a wide range of weights to suit your needs with 22 inch or 24 inch rings and breaker rings.
With even weight distribution over the three units, the weight is transferred by hydraulics so that even at the tips the wing rolls are applying the weight efficiently.
And the HFR/AW Cambridge roll follows the contours of your land because each wing has two pivot points, one near the centre of the frame and one in the centre of each wing.
This combined with a special drawbar mounting, enables the roll to compensate for undulations (waves) it encounters – head on.
Large Diameter rings
The HFRAW and the HD models also have large diameter rings – 22” and 24” with automatic wear take up, reduce power and traction requirements and these rings can also break up clods without the need for breaker rings.
The rings are only 3” wide so you get more than a third more peaks than usual, and if you have our breaker rings fitted – they keep the roll clean without damaging crops.
Easy changeover from transport to working position
The change over from work to transport is simple. Which makes sure you don’t scuff up your field near the gate.
The frame is built with 6-8mm thickness box section steel
The roll is mounted for both transport and work on a bar between the two lower lift arms of the tractor.
Our rolls come in 4 different sizes and with 22 or 24 inch rings.
We also manufacture Vari-Roll – this is a unique 2-in-1 roll that can vary its size to work with a set of Disc Harrows or a Double Press.